R3303-HP HSR6800 Routers MPLS Command Reference

116
Resv Style : FF
IncludeAnyAff : 0x0
ExcludeAllAff : 0x0
IncludeAllAff : 0x0
Created Time : 2011/01/28 09:59:49
Table 55 Command output
Field Descri
p
tion
No Number.
LSP-Id
LSP ID of the tunnel.
A value containing an * indicates that the CR-LSP is
the reverse CR-LSP of a bidirectional tunnel.
The device does not support bidirectional MPLS TE
tunnel.
Tunnel-Name Tunnel name configured on the ingress node.
Destination Destination router ID.
In-Interface Incoming interface.
Out-Interface Outgoing interface.
Tunnel BW Tunnel bandwidth.
Class Type Service class type.
Ingress LSR-Id
Ingress LSR ID.
A value containing an * indicates that the CR-LSP is
the reverse CR-LSP of a bidirectional tunnel.
The device does not support bidirectional MPLS TE
tunnel.
Egress LSR-Id Egress LSR-ID.
Setup-Priority Setup priority of link.
Hold-Priority Holding priority of link.
Sign-Protocol Signaling protocol.
Resv Style Reservation style.
IncludeAnyAff Any affinity properties that must be included.
ExcludeAllAff Link properties that are excluded.
IncludeAllAff All link affinity properties that must be included.
Created Time Time when the tunnel was created.
display mpls te tunnel path
Use display mpls te tunnel path to display the path or paths that the specified or all MPLS TE tunnels
traverse on this node.