R3303-HP HSR6800 Routers MPLS Command Reference

147
mpls te cspf
Use mpls te cspf to enable CSPF.
Use undo mpls te cspf to disable CSPF.
Syntax
mpls te cspf
undo mpls te cspf
Default
CSPF is disabled.
Views
MPLS view
Default command level
2: System level
Usage guidelines
Before enabling CSPF, enable MPLS TE in MPLS view.
CSPF provides an approach to path selection in MPLS domains. You must enable CSPF to establish an
MPLS TE tunnel through dynamic signaling.
You must enable CSPF before configuring other CSPF related functions.
Examples
# Enable CSPF on the current node.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls te cspf
mpls te cspf timer failed-link
Use mpls te cspf timer failed-link to configure the failed link timer.
Use undo mpls te cspf timer failed-link to restore the default.
Syntax
mpls te cspf timer failed-link timer-interval
undo mpls te cspf timer failed-link
Default
The failed link timer is 10 seconds.
Views
MPLS view
Default command level
2: System level