R3303-HP HSR6800 Routers MPLS Command Reference

6
Create Time : 07:57:26:927
Last Change Time : 07:57:26:927
Tunnel ID : 0xc0002(Done)
GrCount: 0
Service : Statistics(Succeeded)
Table 2 Command output
Field Descri
p
tion
In Label Incoming label.
LSP Type
LSP type: LDP LSP, CR-LDP, RSVP LSP, BGP LSP, L3VPN LSP, STATIC
LSP, STATIC CR-LSP, L2VPN LSP, or BGP IPv6 LSP.
In Interface Incoming interface.
Operation Operation type: POP, POPGO, SWAPGO, or NULL.
Swap Label Label for swapping.
Out Interface Outgoing interface.
Service Instance ID L2VPN service instance ID.
Status
Tunnel status:
• MAIN—Main tunnel.
• BACKUP—Backup tunnel. The BACKUP status is displayed only
when the tunnel is the backup tunnel in a 1+1 tunnel protection
group.
Create Time Time when the entry was created.
Last Change Time Time of the last update of the entry.
Tunnel ID
Public tunnel ID and entry status (Done or Waiting).
GrCount—Number of times that GR occurs.
Service
Service type and status. The service type is Statistics and the service
status can be Succeeded (service has been enabled successfully) or
Failed (service failed to be enabled).
display mpls interface
Use display mpls interface to display MPLS information about one or all interfaces with MPLS enabled.
Syntax
display mpls interface [ interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays MPLS information about all MPLS-enabled interfaces.