R3303-HP HSR6800 Routers MPLS Command Reference

155
Syntax
mpls te link administrative group value
undo mpls te link administrative group
Default
The link administrative group attribute is 0x00000000.
Views
Interface view
Default command level
2: System level
Parameters
value: Link administrative group attribute, in the range of 0x00000000 to 0xFFFFFFFF. It is a set of 32
link properties. Each bit represents a property with a value of 0 or 1. By ANDing the administrative group
attribute bits with the corresponding link affinity attribute bits of an MPLS TE tunnel, MPLS TE identifies the
properties of the links that the MPLS TE tunnel can use.
Usage guidelines
The interface properties are propagated globally and are used for path selection at the tunnel ingress.
Examples
# Assign interface GigabitEthernet 2/1/1 the link administrative group attribute of 0x00000101.
<Sysname> system-view
[Sysname] interface giabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mpls te link administrative group 101
Related commands
mpls te affinity property
mpls te loop-detection
Use mpls te loop-detection to configure the node to perform loop detection when setting up the MPLS TE
tunnel.
Use undo mpls te loop-detection to disable loop detection.
Syntax
mpls te loop-detection
undo mpls te loop-detection
Default
A node does not perform loop detection when setting up a tunnel.
Views
Tunnel interface view
Default command level
2: System level