R3303-HP HSR6800 Routers MPLS Command Reference

206
Usage guidelines
• If you specify an interface but do not specify a service instance, the command displays the PW
entries of the VCs created on the Layer 3 interface.
• If you specify both an interface and a service instance, the command displays the PW entries of the
VCs created for the service instance on the Layer 2 interface.
• If you do not specify any parameter, the command displays the PW entries of all VCs.
Examples
# Display PW information for the MPLS L2VPN.
<Sysname> display mpls l2vpn fib pw vpws
Total PW Entry:1
In Interface ServiceID InVCLabel OutVCLabel TunnelID
--------------------------------------------------------------
GigabitEthernet2/1/0 1000 1000 1002 0x878ad000
Table 84 Command output
Field Descri
p
tion
Total PW Entry
Total number of VPWS PW entries, which is displayed only
when you display all VPWS PW entries.
In Interface Incoming interface, which is bound to L2VPN.
ServiceID Service instance ID.
InVCLabel Incoming VC label.
OutVCLabel Outgoing VC label.
TunnelID ID of the public tunnel.
# Display the detailed MPLS L2VPN PW information.
<Sysname> display mpls l2vpn fib pw vpws verbose
Total PW Entry:4
In Interface : S2/1/0:0
Service Instance ID : 0
In VC Label : 1214
Out VC Label : 3758
Out Interface : ----
Encapsulation Type : TDM CESOPSN_BASIC
Entry Type : Send
MTU : 1500
Control Word : YES
Packets received : 0
Receives discarded : 0
Packets sent : 0
Sends discarded : 0
Tunnel ID : 0xd2000(Done)
GRCount:2
SIG In VC Label : 1215
SIG Out VC Label : 3759