R3303-HP HSR6800 Routers MPLS Command Reference

233
VPLS configuration commands
bandwidth
Use bandwidth to set the upper speed limit of a VPLS instance.
Use undo bandwidth to restore the default.
Syntax
bandwidth vpn-speed
undo bandwidth
Default
The upper speed limit of a VPLS instance is 102400 kbps.
Views
VSI view
Default command level
2: System level
Parameters
vpn-speed: Specifies the upper speed limit of the VPLS instance in kbps, in the range of 64 to 4194303.
The system automatically calculates a speed that is the greatest multiple of 64 kbps between 64 and the
specified value.
Usage guidelines
This command, together with the broadcast-restrain command, defines a threshold that is used in
suppressing the broadcast traffic of the VPLS instance. When the speed of the broadcast traffic exceeds
the product of the speed limit and the broadcast suppression ratio, the extra broadcast traffic will be
dropped.
Examples
# Set the upper speed limit of VPLS instance aaa to 10 Mbps.
<Sysname> system-view
[Sysname] vsi aaa
[Sysname-vsi-aaa] bandwidth 10240
broadcast-restrain
Use broadcast-restrain to set the broadcast suppression ratio for a VPLS instance.
Use undo broadcast-restrain to restore the default.
Syntax
broadcast-restrain ratio
undo broadcast-restrain