R3303-HP HSR6800 Routers MPLS Command Reference

248
Field Descri
p
tion
Signaling
PW signaling protocol used by the VPLS instance: ldp, bgp, or
static.
Remote Vsi ID
ID of the remote VPLS instance, displayed as double hyphens
(--) for a static VPLS instance.
VC State Status of the virtual circuit: up, block, or down.
Encapsulation
Encapsulation type of the VPLS instance: vlan, ethernet, or
bgp-vpls.
Group ID Displayed as double hyphens (--) for a static VPLS instance.
Remote MTU Maximum transmission unit configured on the peer PE.
Peer Ip Address IP address of the peer of the VPLS instance.
PW Type
PW type:
• label—NPW, the PW with a PE.
• MEHVPLS—UPW, the PW with a UPE.
Link ID ID of the PW in the VPLS instance.
Related commands
vsi
display vsi
Use display vsi to display information about a specific VPLS instance or all VPLS instances.
Syntax
display vsi [ vsi-name ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vsi-name: Specifies the name of the VPLS instance, a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about VPLS instance aaa.