R3303-HP HSR6800 Routers MPLS Command Reference

261
Default
The tunneling policy specified by the tnl-policy command in VSI view is used.
Views
PW class view
Default command level
2: System level
Parameters
policy-name: Specifies the name of the tunneling policy, a case-insensitive string of 1 to 19 characters.
Usage guidelines
If you specify a non-existent tunneling policy in the pw-tunnel-policy command, the tunneling policy
specified by the tnl-policy command in VSI view will be used. For information about how to configure a
tunneling policy, see MPLS Configuration Guide.
Examples
# Specify tunneling policy tp100 for PW class pw100.
<Sysname> system-view
[Sysname] pw-class pw100
[Sysname-pw-pw100] pw-tunnel-policy tp100
Related commands
• tnl-policy
• tunnel-policy
reset bgp vpls
Use reset bgp vpls to reset a specific VPLS BGP connection or all VPLS BGP connections.
Syntax
reset bgp vpls { as-number | ip-address | all | external | internal }
Views
User view
Default command level
2: System level
Parameters
as-number: Resets VPLS BGP connections to peers in a specific AS in the range of 1 to 4294967295.
ip-address: Resets the VPLS BGP connection to a specific peer.
all: Resets all VPLS BGP connections.
external: Resets VPLS EBGP connections.
internal: Resets VPLS IBGP connections.
Examples
# Reset all VPLS BGP connections.
<Sysname> reset bgp vpls all