R3303-HP HSR6800 Routers MPLS Command Reference

285
Field Descri
p
tion
Configured
Settings of the local timers, including the active hold
interval and keepalive interval.
Received Received active hold interval.
Negotiated Negotiated active hold interval.
Peer optional capabilities Optional capabilities of the peer.
Peer support bgp multi-protocol extended The peer supports multiprotocol extension.
Peer support bgp route refresh capability The peer supports route refresh capability.
Address family IPv4 Unicast IPv4 unicast family capability.
Received
Total number of received messages and the number of
received update messages.
Sent
Total number of sent messages and the number of sent
update messages.
Maximum allowed prefix number
Maximum number of routes that can be learned from
the peer.
Threshold
Threshold for warning. When the percentage of the
number of the received route prefixes to the maximum
number of routes supported reaches this value, the
device generates a prompt.
Optional capabilities Local optional capabilities.
ORF advertise capability based on prefix (type 64):
The ORF address prefix capability is supported. The
capability value is 64.
Local
Indicates whether the local device supports sending
and receiving Route-refresh packets with ORF
information. The value can be:
• both—Supports sending and receiving
Route-refresh messages with ORF information.
• send—Supports sending Route-refresh messages
with ORF information.
• receive—Supports receiving Route-refresh
messages with ORF information.
Negotiated
ORF capability negotiated by the local and remote
peers. The value can be:
• send—The local peer can send Route-refresh
messages with ORF information and the remote
peer can receive Route-refresh messages with ORF
information.
• receive—The local peer can receive Route-refresh
messages with ORF information and the remote
peer can send Route-refresh messages with ORF
information.
This field is displayed only when the ORF capability
negotiation is successful.
Peer Preferred Value
Preference value configured for the routes from the
peer.
BFD Indicates whether BFD is enabled for the peer.