R3303-HP HSR6800 Routers MPLS Command Reference

305
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area NeighborId Source-IP Destination-IP State Cost
0.0.0.1 120.1.1.2 3.3.3.3 5.5.5.5 P-2-P 10
Table 123 Command output
Field Descri
p
tion
Area OSPF area to which the sham link belongs.
NeighborId Router ID of the sham link neighbor.
Source-IP Source IP address of the sham link.
Destination-IP Destination IP address of the sham link.
State Status of the sham link interface.
Cost Cost of the sham link.
# Display information about OSPF sham links in area 1.
<Sysname> display ospf sham-link area 1
OSPF Process 100 with Router ID 100.1.1.2
Sham-Link: 3.3.3.3 --> 5.5.5.5
Neighbor ID: 120.1.1.2 State: Full
Area: 0.0.0.1
Cost: 10 State: P-2-P Type: Sham
Timers: Hello 10, Dead 40, Retransmit 5, Transmit Delay 1
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 1 neighbor(s) left.
Table 124 Command output
Field Descri
p
tion
Sham-Link
Sham link expressed in the format of source IP address to
destination IP address.
Neighbor ID Router ID of the sham link neighbor.
State Status of the sham link neighbor.
Area OSPF area where the sham link resides.
Cost Cost of the sham link.
State Status of the sham link.
Type Type of the sham link.
Timers Timers of the sham link.
MD5 authentication enabled MD5 authentication for the sham link is enabled.
The last key Latest key ID for MD5 authentication.
neighbor(s) Number of neighbors that do not finish the rollover.