R3303-HP HSR6800 Routers MPLS Command Reference

306
Related commands
sham-link
display tunnel-policy
Use display tunnel-policy to display information about a tunneling policy or all tunneling policies.
Syntax
display tunnel-policy { all | policy-name tunnel-policy-name } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all tunneling policies.
tunnel-policy-name: Specifies the name of a tunneling policy, a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all tunneling policies.
<Sysname> display tunnel-policy all
Tunnel policy name : 1
Preferred paths : not configured
Select-Seq : CR-LSP
Load balance number : 1
Tunnel policy name : 2
Preferred paths : not configured
Select-Seq : LSP
Load balance number : 8
Tunnel policy name : 3
Preferred paths :
Number Interface Tunnel type Fallback
------------------------------------------------------
2 Tunnel2 TE enabled
Select-Seq : LSP GRE CR-LSP
Load balance number : 1