R3303-HP HSR6800 Routers MPLS Command Reference

324
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 group test
[Sysname-bgp-af-vpnv4] quit
# In BGP-L2VPN address family view, add peer 1.1.1.1 into peer group test.
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer test enable
[Sysname-bgp-af-l2vpn] peer 1.1.1.1 group test
[Sysname-bgp-af-l2vpn] quit
# In VPLS address family view, add peer 1.1.1.1 into peer group test.
[Sysname-bgp] vpls-family
[Sysname-bgp-af-vpls] peer test enable
[Sysname-bgp-af-vpls] peer 1.1.1.1 group test
peer ip-prefix (BGP-VPNv4 subaddress family view)
Use peer ip-prefix to apply a route filtering policy based on IP prefix list to a peer or peer group.
Use undo peer ip-prefix to remove the configuration.
Syntax
peer { group-name | ip-address } ip-prefix prefix-name { export | import }
undo peer { group-name | ip-address } ip-prefix { export | import }
Default
No route filtering policy based on IP prefix list is applied to a peer or peer group.
Views
BGP-VPNv4 subaddress family view
Default command level
2: System level
Parameters
group-name: Specifies the name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.
prefix-name: Specifies the name of the IP prefix list, a string of 1 to 19 characters.
export: Filters the routes to be advertised to the specified peer or peer group.
import: Filters the routes received from the specified peer or peer group.
Examples
# In BGP-VPNv4 subaddress family view, filter the routes received from peer group group1 by using IP
prefix list list1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer group1 ip-prefix list1 import