R3303-HP HSR6800 Routers MPLS Command Reference

349
load-balance-number number: Specifies the number of tunnels for load balancing, in the range of 1 to
8.
Usage guidelines
Only tunnels of the types specified in the tunnel select-seq command can be used.
A tunnel type closer to the select-seq keyword has a higher priority.
The number of tunnels for load balancing refers to the number of tunnels that an application can use.
CR-LSP tunnels are preferred in this order:
1. CR-LSPs configured with ACLs
2. CR-LSPs bound with VPN
3. Ordinary CR-LSPs
These three types of CR-LSPs are mutually exclusive. Only one of the three types is selected at a time.
Examples
# Define a tunneling policy, specifying that only GRE tunnels can be used and the number of tunnels for
load balancing be 2.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1] tunnel select-seq gre load-balance-number 2
tunnel-policy
Use tunnel-policy to create a tunneling policy and enter tunneling policy view.
Use undo tunnel-policy to delete a tunneling policy.
Syntax
tunnel-policy tunnel-policy-name
undo tunnel-policy tunnel-policy-name
Views
System view
Default command level
2: System level
Parameters
tunnel-policy-name: Specifies the name for the tunneling policy, a string of 1 to 19 characters.
Examples
# Create a tunneling policy named po1 and enter tunneling policy view.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1]
Related commands
tunnel select-seq