R3303-HP HSR6800 Routers MPLS Command Reference

28
Table 15 Command output
Field Descri
p
tion
Type Type of the tunnel detected by BFD: LSP or TE Tunnel.
Local Discr Local discriminator value of the BFD session.
Remote Discr Remote discriminator value of the BFD session.
Session State
BFD session state:
• Init—initialization state.
• Up.
• Down.
Source IP IP address of the active end (ingress LSR) of the BFD session.
Session Role
Role of the current LSR in the session:
• Active—Initiator of the BFD session.
• Passive—Responder of the BFD session.
display mpls lsp statistics
Use display mpls lsp statistics to display LSP statistics.
Syntax
display mpls lsp statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display LSP statistics.
<Sysname> display mpls lsp statistics
Lsp Type Total Ingress Transit Egress
STATIC LSP 0 0 0 0
STATIC CRLSP 0 0 0 0
LDP LSP 8 2 2 4
CRLDP CRLSP 0 0 0 0
RSVP CRLSP 0 0 0 0
BGP LSP 0 0 0 0