R3303-HP HSR6800 Routers MPLS Command Reference

45
graceful-restart mpls ldp
Use graceful-restart mpls ldp to restart MPLS LDP gracefully.
Syntax
graceful-restart mpls ldp
Views
User view
Default command level
1: Monitor level
Usage guidelines
This command is only used to test MPLS LDP GR function. It does not perform active/standby switchover.
Do not use it in other cases.
The MPLS LDP GR capability is required for this command to take effect.
Examples
# Restart MPLS LDP gracefully.
<Sysname> graceful-restart mpls ldp
Related commands
graceful-restart (MPLS LDP view)
graceful-restart timer neighbor-liveness
Use graceful-restart timer neighbor-liveness to set the LDP neighbor liveness time.
Use undo graceful-restart timer neighbor-liveness to restore the default.
Syntax
graceful-restart timer neighbor-liveness timer
undo graceful-restart timer neighbor-liveness
Default
The LDP neighbor liveness time is 120 seconds.
Views
MPLS LDP view
Default command level
2: System level
Parameters
timer: Specifies the LDP neighbor liveness time in the range of 60 to 300 seconds.
Usage guidelines
Modifying the LDP neighbor liveness time also causes all LDP sessions and all LSPs based on the sessions
to be removed and then reestablished.