HP Comware 5 Debug Manual Vol 3

Smart Link debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
The Smart Link module name is identified as "SMLK" in debugging messages.
debugging smart-link
Use debugging smart-link to enable debugging for the specified or all smart link groups.
Use undo debugging smart-link to disable debugging for the specified or all smart link groups.
Syntax
debugging smart-link [ group group-id ] { all | error | event | fsm | packet }
undo debugging smart-link [ group group-id ] { all | error | event | fsm | packet }
Default
Smart link group debugging is disabled.
Views
User view
Default command level
1. Monitor level
Parameters
group group-id: Specifies a smart link group by its number.
all: Specifies all Smart Link debugging.
error: Specifies Smart Link error debugging.
event: Specifies Smart Link event debugging.
fsm: Specifies state machine debugging.
packet: Specifies packet debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging smart-link error command.
Table 195 Output from the debugging smart-link error command
Field
Description
Failed to allocate memory for
String
SMLK failed to allocate memory for the following:
• batch bak—Bulk backup.
• realtime bak—Realtime backup.
• create group—Smart link group creation.
• smlk port info—Smart link port information.
Failed to create mbuffer Creating MBUF failed.
387