HP HSR6800 Router Series - HP HSR6800-CMW520-R3103 Release Notes

4096M bytes DDR3 SDRAM Memory

8M bytes Flash Memory

128K bytes NVRAM

PCB Version: Ver.B

Logic Version: 139.0

Basic BootWare Version: 1.09

Extend BootWare Version: 1.09

[FIXED PORT] GE2/0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0

[FIXED PORT] GE2/0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0

[SUBSLOT 1] The SubCard is not present

[SUBSLOT 2] HIM-8GBE (Hardware)Ver.B, (Driver)1.0, (Cpld)2.0

Slot 3: FIP-210 uptime is 0 week, 0 day, 1 hour, 4 minutes

CPU type: RMI XLR732 1000MHz

2048M bytes DDR2 SDRAM Memory

4M bytes Flash Memory

128K bytes NVRAM

PCB Version: Ver.C

Logic Version: 2.0

Basic BootWare Version: 1.07

Extend BootWare Version: 1.07

[FIXED PORT] GE3/0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0

[FIXED PORT] GE3/0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0

[SUBSLOT 1] The SubCard is not present

[SUBSLOT 2] HIM-CL2P(E) (Hardware)Ver.B, (Driver)1.0, (Cpld)1.0

Using FTP to upgrade software

This section describes how to upgrade system software by using FTP.

Backing up the running system software image and configuration file

1. Perform the save command in any view to save the current configuration.

<Sysname> save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[cfa0:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait....

Configuration is saved to device successfully.

2. Perform the dir command in user view to identify the system software image and configuration file

names and verify that the CF card has sufficient space for the new system software image.

<Sysname> dir

Directory of cfa0:/