HP HSR6802 HSR6804 HSR6808 Routers Installation Guide

97
Model
Central
wavelen
g
th
Connector
Optical fiber
Transmission
rate
Max. transmission
distance
SFP-GE-LX-SM131
0-A
1310 nm LC
9/125 m
single-mode
optical fiber
1250 Mbps
10 km
(6.21 miles)
SFP-GE-LH40-SM1
310
1310 nm LC
9/125 m
single-mode
optical fiber
1250 Mbps
40 km
(24.86 miles)
SFP-GE-LH40-SM1
550
1550 nm LC
9/125 m
single-mode
optical fiber
1250 Mbps
40 km
(24.86 miles)
SFP-GE-LH70-SM1
550
1550 nm LC
9/125 m
single-mode
optical fiber
1250 Mbps
70 km
(43.50 miles)
Maximum interface modules provided by the FIP-110 in full configuration
FIP/Interface
module
HSR6802 HSR6804 HSR6808
FIP-110 2 4 8
MIM 8 16 32
HIM Not supported Not supported Not supported
FIP-210
The FIP-210 provides two combo interfaces. It can hold two HIMs, two MIMs, or a mix of a HIM and a
MIM. MIMs are installed in the lower two slots of the FIP-210.
FIP-210 front panel
Figure 92 FIP-210 front panel
(1) Combo interface 1 (2) Combo interface 0
(3) Slot 1 (4) Slot 2
(5) OPEN BOOK mark
FIP-210 specifications
Item Remarks
Flash 4 MB