HP HSR6802 HSR6804 HSR6808 Routers Installation Guide

31
Figure 35 Connecting a fiber cable
5. Examine the LINK LED after connection.
{ If the LED is on, the optical fiber link is present.
{ If the LED is off, no link is present. This might be because the TX and Rx port of the optical fiber
are not connected correctly. In this case, connect the optical fiber again.
Connecting an E1/T1 cable
Overview
E1 cable
You can use an 8E1 interface cable to connect to MIM-8E1(75)/MIM-8E1(75)-F modules.
Figure 36 8E1 splitter cable