HP HSR6802 HSR6804 HSR6808 Routers Installation Guide

45
Ste
p
Command
3. Set the authentication mode.
authentication-mode none
4. Set the user privilege level.
user privilege level 3
2. Plug the D-9 female connector to the serial port of the configuration terminal or PC.
3. Connect the RJ-45 connector to the AUX port of the router. Then you can log in to the router through
the AUX port.
For more information about how to log in to the router through an AUX port, see HP HSR6800 Routers
Fundamentals Configuration Guides.
Configuring basic settings
Ste
p
Command Remarks
1. Set the current time and date.
clock datetime time date
Optional.
Available in user view.
2. Enter system view.
system-view Available in user view.
3. Enter Ethernet interface view.
interface interface-type
interface-number
N/A
4. Specify an IP address for the
interface.
ip address ip-address { mask-length
| mask } [ sub ]
By default, no IP address is
assigned to any interface.
5. Return to system view.
quit Available in any view.
6. Specify a static route.
ip route-static dest-address { mask |
mask-length } { next-hop-address |
interface-type interface-number
[ next-hop-address ] | vpn-instance
d-vpn-instance-name
next-hop-address } track
track-entry-number [ preference
preference-value ] [ tag tag-value ]
[ description description-text ]
By default, the preference of a
static route is 60, tag is 0, and no
description is configured.
7. Save the current configuration
to the startup configuration file
in the root directory of the
storage media.
save [ safely ] [ backup | main ]
[ force ]
Available in any view.
8. Verify the running
configuration.
display current-configuration Available in any view.