HP HSR6802 HSR6804 HSR6808 Routers Installation Guide

Subslot 2 : MIM-2GBE

• Use the display device slot slot-number command to display detailed information about the card in

the specified slot.

<Sysname> display device slot 1

System-mode(Current/After Reboot): Normal/Normal

Slot 1 : RSE-X2

SubSlot No. Card Type Status Max Ports

--------------------------------------------------------

1 Fixed SubCard Normal 3

Table 11 Command output

Field Descri

tion

Slot No. Slot number of the card.

Card Type Card model. The value NONE indicates that no card is present in the slot.

Status

Running status of the card:

• Absent—No card is present in the slot.

• Fault—The card in the slot is booting, or the card has failed and cannot boot

correctly.

• Normal—The card in the slot is operating correctly.

Max Ports Maximum number of ports that the card supports.

Displaying the electrical label data

Electrical label data is also called permanent configuration data or archive information, which includes

the card name, serial number, MAC address, and vendor name.

• Use the display device manuinfo command to display the electrical label data for the card in each

slot.

<Sysname> display device manuinfo

Slot 0:

DEVICE_NAME: RT-RSE-X2

DEVICE_SERIAL_NUMBER: 210231A1RG0000000002

MAC_ADDRESS: 00FE-1230-1230

MANUFACTURING_DATE: 2011-12-12

VENDOR_NAME:HP

• Use the display device manuinfo slot slot-number command to display the electrical label data for