R3303-HP HSR6800 Routers High Availability Command Reference

49
Interval: 1s SendCCM: 12018
Loopback:
NextSeqNumber: 8877
SendLBR: 0 ReceiveInOrderLBR: 0 ReceiveOutOrderLBR: 0
Linktrace:
NextSeqNumber: 8877
SendLTR: 0 ReceiveLTM: 0
No CCM from some remote MEPs is received.
One or more streams of error CCMs is received. The last-received CCM:
Maintenance domain: mdtest1
Maintenance association:matest1
MEP:5 Sequence Number:0x50A
Received Time: 02/3/6 13:01:34
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6 Sequence Number:0x63A
Received Time: 02/3/6 13:01:34
Some other MEPs are transmitting the RDI bit.
Table 16 Command output
Field Descri
p
tion
Interface Interface that an MD belongs to.
Maintenance domain MD that a MEP belongs to.
Maintenance association MA that a MEP belongs to.
Level Level of the MD.
VLAN VLAN that the MA belongs to.
Direction Direction of the MEPs.
Administrative state State of MEP, either Active or Inactive.
CCM send Whether the MEP sends CCM.
FNG state
State of FNG (Fault Notification Generator):
• FNG_RESET—A fault has been cleared.
• FNG_DEFECT—A fault has been detected.
• FNG_REPORT_DEFECT—Report a fault.
• FNG_DEFECT_REPORTED—A fault has been reported.
• FNG_DEFECT_CLEARING—A fault is being cleared.
If this field is not supported, a hyphen (-) is displayed.
CCM Information related to CCM.