R3303-HP HSR6800 Routers High Availability Configuration Guide

158
Displaying and maintaining VRRP for IPv4
Task Command Remarks
Display VRRP group status.
display vrrp [ verbose ] [ interface
interface-type interface-number
[ vrid virtual-router-id ] ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display VRRP group statistics.
display vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Clear VRRP group statistics.
reset vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ]
Available in user view.
Configuring VRRP for IPv6
VRRP for IPv6 configuration task list
Task Remarks
Configuring a VRRP working mode Optional.
Specifying the type of MAC addresses mapped to virtual IPv6
addresses
Optional.
This configuration does not apply to VRRP
load balancing mode.
Creating a VRRP group and configuring a virtual IPv6 address Required.
Configuring router priority, preemptive mode and tracking
function
Optional.
Configuring VF tracking
Optional.
The VF tracking function applies to only VRRP
load balancing mode.
Configuring VRRP packet attributes Optional.
Specifying the type of MAC addresses mapped to virtual IPv6
addresses
After you specify the type of MAC addresses mapped to the virtual IPv6 address of VRRP groups and
create a VRRP group, the master in the VRRP group uses the specified type of MAC address as the source
MAC address for sending packets and uses the specified type of MAC address to answer ND requests