R3303-HP HSR6800 Routers High Availability Configuration Guide

208
To enable BFD trap:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable BFD trap.
snmp-agent trap enable bfd
Optional.
Enabled by default.
For more information about the
command, see the snmp-agent
trap enable command in Network
Management and Monitoring
Command Reference.
Displaying and maintaining BFD
Task Command Remarks
Display information about BFD-enabled
interfaces.
display bfd interface [ verbose ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about enabled BFD
debugging.
display bfd debugging-switches
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display BFD session information (in
standalone mode).
display bfd session [ slot
slot-number [ all | verbose ] |
verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display BFD session information (in IRF
mode).
display bfd session [ chassis
chassis-number slot slot-number
[ all | verbose ] | verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear BFD session statistics (in standalone
mode).
reset bfd session statistics [ slot
slot-number ]
Available in user view.
Clear BFD session statistics (in IRF mode).
reset bfd session statistics
[ chassis chassis-number slot
slot-number ]
Available in user view.