R3303-HP HSR6800 Routers High Availability Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR68xx Configure-to-Order Router Solution

231

232

233

234

235

236

237

238

239

240

226

[RouterA-GigabitEthernet1/0/2] return

4. Configure VRRP on Router B:

# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.

<RouterB> system-view

[RouterB] interface gigabitethernet 1/0/2

[RouterB-GigabitEthernet1/0/2] vrrp vrid 1 virtual-ip 192.168.0.10

[RouterB-GigabitEthernet1/0/2] return

Verifying the configuration

# Display detailed information about the VRRP group on Router A.

<RouterA> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface GigabitEthernet1/0/2

VRID : 1 Adver Timer : 1

Admin Status : Up State : Master

Config Pri : 110 Running Pri : 110

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Virtual MAC : 0000-5e00-0101

Master IP : 192.168.0.101

VRRP Track Information:

Track Object : 1 State : Positive Pri Reduced : 20

# Display information about track entry 1 on Router A.

<RouterA> display track 1

Track ID: 1

Status: Positive

Duration: 0 days 0 hours 2 minutes 11 seconds

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD session:

Packet type: Echo

Interface : GigabitEthernet1/0/1

Remote IP : 1.1.1.2

Local IP : 1.1.1.1

# Display detailed information about the VRRP group on Router B.

<RouterB> display vrrp verbose