R3303-HP HSR6800 Routers High Availability Configuration Guide

[RouterC] cfd service-instance 2 md MD_B ma MA_B

4. Configure MEPs:

# On Router A, configure a MEP list in service instance 1. Create and enable inward-facing MEP

1001 in service instance 1 on GigabitEthernet 3/0/1.

[RouterA] cfd meplist 1001 4002 5001 service-instance 1

[RouterA] interface gigabitethernet 3/0/1

[RouterA-GigabitEthernet3/0/1] cfd mep 1001 service-instance 1 inbound

[RouterA-GigabitEthernet3/0/1] cfd mep service-instance 1 mep 1001 enable

[RouterA-GigabitEthernet3/0/1] quit

# On Router B, configure a MEP list in service instances 1 and 2, respectively. Create and enable

outward-facing MEP 2001 in service instance 2 on GigabitEthernet 3/0/3.

[RouterB] cfd meplist 1001 4002 5001 service-instance 1

[RouterB] cfd meplist 2001 4001 service-instance 2

[RouterB] interface gigabitethernet 3/0/3

[RouterB-GigabitEthernet3/0/3] cfd mep 2001 service-instance 2 outbound

[RouterB-GigabitEthernet3/0/3] cfd mep service-instance 2 mep 2001 enable

[RouterB-GigabitEthernet3/0/3] quit

# On Router D, configure a MEP list in service instances 1 and 2, respectively, create and enable

outward-facing MEP 4001 in service instance 2 on GigabitEthernet 3/0/1, and then create and

enable inward-facing MEP 4002 in service instance 1 on GigabitEthernet 3/0/3.

[RouterD] cfd meplist 1001 4002 5001 service-instance 1

[RouterD] cfd meplist 2001 4001 service-instance 2

[RouterD] interface gigabitethernet 3/0/1

[RouterD-GigabitEthernet3/0/1] cfd mep 4001 service-instance 2 outbound

[RouterD-GigabitEthernet3/0/1] cfd mep service-instance 2 mep 4001 enable

[RouterD-GigabitEthernet3/0/1] quit

[RouterD] interface gigabitethernet 3/0/3

[RouterD-GigabitEthernet3/0/3] cfd mep 4002 service-instance 1 inbound

[RouterD-GigabitEthernet3/0/3] cfd mep service-instance 1 mep 4002 enable

[RouterD-GigabitEthernet3/0/3] quit

# On Router E, configure a MEP list in service instance 1. Create and enable inward-facing MEP

5001 in service instance 1 on GigabitEthernet 3/0/4.

[RouterE] cfd meplist 1001 4002 5001 service-instance 1

[RouterE] interface gigabitethernet 3/0/4

[RouterE-GigabitEthernet3/0/4] cfd mep 5001 service-instance 1 inbound

[RouterE-GigabitEthernet3/0/4] cfd mep service-instance 1 mep 5001 enable

[RouterE-GigabitEthernet3/0/4] quit

5. Configure MIP generation rules:

# Configure the MIP generation rule in service instance 1 on Router B as explicit.

[RouterB] cfd mip-rule explicit service-instance 1

# Configure the MIP generation rule in service instance 2 on Router C as default.

[RouterC] cfd mip-rule default service-instance 2

6. Configure CC:

# On Router A, enable the sending of CCM frames for MEP 1001 in service instance 1 on

GigabitEthernet 3/0/1.

[RouterA] interface gigabitethernet 3/0/1

[RouterA-GigabitEthernet3/0/1] cfd cc service-instance 1 mep 1001 enable