R3303-HP HSR6800 Routers High Availability Configuration Guide

59
Task Remarks
Configuring the hold off timer Optional
Configuring the keepalive timer Optional
Configuring the topology stability timer Optional
Configuring the TC timers Optional
Configuring the TP timers Optional
Configuring the WTR timer Optional
Testing connectivity between RPR stations Optional
Configuring basic RPR functions
Configuring an RPR physical port
To configure an RPRPOS interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter RPR physical port view.
interface rprpos interface-number N/A
3. Configure the description for
the interface.
description text
Optional.
By default, the description of an
RPR physical port is interface-name
Interface.
4. Set the overhead bytes of
the interface.
flag { c2 | { j0 | j1 } { sdh | sonet } }
flag-value
Optional.
By default, the C2 byte value of an
RPRPOS interface is 0x16, and the
SDH J0 and J1 byte values are null.
5. Ignore CRC of the J1 byte.
flag j1 ignore
Optional.
By default, CRC is performed for
the J1 byte.
6. Set the framing format on
the interface.
frame-format { sdh | sonet }
Optional.
By default, the framing format is
SDH.
7. Set the SD or SF alarm
threshold for the interface.
threshold { sd | sf } value
Optional.
By default, the SD alarm threshold
is 5, and the SF alarm threshold is
3
8. Set the maximum available
bandwidth for the interface.
bandwidth bandwidth-value Optional.
9. Shut down the interface.
shutdown
Optional.
Enabled by default.