R3303-HP HSR6800 Routers High Availability Configuration Guide

83
Ste
p
Command Remarks
2. Enter MST region view.
stp region-configuration
Not required if the device is
operating in PVST mode.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
3. Configure the
VLAN-to-instance mapping
table.
• Method 1:
instance instance-id vlan
vlan-list
• Method 2:
vlan-mapping modulo modulo
Optional.
Use either method.
All VLANs in an MST region are
mapped to MSTI 0 (the CIST) by
default.
Not required if the device is
operating in PVST mode.
For more information about the
commands, see Layer 2—LAN
Switching Command Reference.
4. Activate MST region
configuration manually.
active region-configuration
Not required if the device is
operating in PVST mode.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
5. Display the currently activated
configuration information of
the MST region.
display stp region-configuration [ |
{ begin | exclude | include }
regular-expression ]
Optional.
Available in any view.
The output of the command
includes VLAN-to-instance
mappings.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
6. Return to system view.
quit
Not required if the device is
operating in PVST mode.
7. Enter RRPP domain view.
rrpp domain domain-id N/A
8. Configure protected VLANs
for the RRPP domain.
protected-vlan reference-instance
instance-id-list
By default, no protected VLAN is
configured for an RRPP domain.
Configuring RRPP rings
When configuring an RRPP ring, you must make some configurations on the ports connecting each node
to the RRPP ring before configuring the nodes.
RRPP ports (connecting devices to an RRPP ring) must be Layer 2 Ethernet ports, Layer 2 GE ports, or Layer
2 aggregate interfaces and cannot be member ports of any aggregation group or smart link group.
After configuring a Layer 2 aggregate interface as an RRPP port, you can still assign ports to or remove
ports from the aggregation group corresponding to the interface.