R3303-HP HSR6800 Routers High Availability Configuration Guide

85
Specifying a transit node
Perform this configuration on a device to be configured as a transit node.
To specify a transit node:
Ste
p
Command
1. Enter system view.
system-view
2. Enter RRPP domain view.
rrpp domain domain-id
3. Specify the current device as a transit
node of the ring, and specify the primary
port and the secondary port.
ring ring-id node-mode transit [ primary-port interface-type
interface-number ] [ secondary-port interface-type
interface-number ] level level-value
Specifying an edge node
When configuring an edge node, you must first configure the primary ring before configuring the
subrings.
Perform this configuration on a device to be configured as an edge node.
To specify an edge node:
Ste
p
Command
1. Enter system view.
system-view
2. Enter RRPP domain view.
rrpp domain domain-id
3. Specify the current device as a transit
node of the primary ring, and specify the
primary port and the secondary port.
ring ring-id node-mode transit [ primary-port interface-type
interface-number ] [ secondary-port interface-type
interface-number ] level level-value
4. Specify the current device as the edge
node of a subring, and specify the edge
port.
ring ring-id node-mode edge [ edge-port interface-type
interface-number ]
Specifying an assistant-edge node
When configuring an assistant-edge node, you must first configure the primary ring before configuring
the subrings.
Perform this configuration on a device to be configured as an assistant-edge node.
To specify an assistant-edge node:
Ste
p
Command
1. Enter system view.
system-view
2. Enter RRPP domain view.
rrpp domain domain-id
3. Specify the current device as a transit node
of the primary ring, and specify the
primary port and the secondary port.
ring ring-id node-mode transit [ primary-port interface-type
interface-number ] [ secondary-port interface-type
interface-number ] level level-value
4. Specify the current device as the
assistant-edge node of the subring, and
specify an edge port.
ring ring-id node-mode assistant-edge [ edge-port
interface-type interface-number ]