R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

343
display ospfv3 interface
Use display ospfv3 interface to display OSPFv3 interface information.
Syntax
display ospfv3 interface [ interface-type interface-number | statistic ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
statistic: Displays the interface statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display OSPFv3 interface information.
<Sysname> display ospfv3 interface serial 2/0
Serial2/0 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
IPsec policy name: policy001, SPI: 300
BFD: Enabled
Table 66 Command output
Field Descri
p
tion
Interface ID Interface ID.
IPv6 Prefixes IPv6 Prefix.