R3303-HP HSR6800 Routers MPLS Command Reference

99
Field Descri
p
tion
RRO Information Information about route recording.
RRO-C Type Type of route recording.
RRO-IP Address IP address of recorded route in the format of X.X.X.X.
RRO-IPPrefixLen IP prefix length of recorded route.
Flow Spec information Flow specifications.
Token Bucket rate Token bucket rate (in kbps), a traffic parameter.
Token Bucket size Token bucket size, a traffic parameter.
Peak Data Rate Peak data rate (in kbps), a traffic parameter.
Maximum packet size Maximum packet size, a traffic parameter.
Minimum policed unit Minimum policed unit, a traffic parameter.
Bandwidth guarantees
Guaranteed bandwidth, a reservation specifications
parameter.
Delay guarantees
Delay guarantee, a reservation specifications
parameter.
QOS service QoS guarantee/control.
Resv Message
Reservation message received on a particular
interface from next hop (X.X.X.X)
Graceful Restart State
State of GR: stale or normal.
If this field is not supported, three hyphens (---) are
displayed.
display mpls rsvp-te sender
Use display mpls rsvp-te sender to display RSVP-TE sender message information.
Syntax
display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.