R3303-HP HSR6800 Routers MPLS Command Reference

112
<Sysname> display mpls te link-administration admission-control
LspID In/Out IF S/H Prio CT BW(kbps)
1.1.1.9:1024 ---/GE2/1/1 7/7 0 0
1.1.1.9:2048 ---/GE2/1/2 7/7 0 0
Table 52 Command output
Field Description
LspID ID of an LSP carried on a link.
In/Out IF Incoming/Outgoing interface.
S/H Prio Setup and holding priorities of CR-LSP.
CT Service class type.
BW(kbps) Bandwidth (in kbps)
display mpls te link-administration bandwidth-allocation
Use display mpls te link-administration bandwidth-allocation to display bandwidth allocation on the
specified or all MPLS TE enabled interfaces.
Syntax
display mpls te link-administration bandwidth-allocation [ interface interface-type interface-number ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and a number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display bandwidth allocation on the MPLS TE enabled interface in prestandard mode.
<Sysname> display mpls te link-administration bandwidth-allocation
Link ID: GigabitEthernet2/1/1
Max Link Bandwidth : 3200000 kbits/sec
Max Reservable Bandwidth of Prestandard RDM : 2000000 kbits/sec
Max Reservable Bandwidth of IETF RDM : 200000 kbits/sec
Max Reservable Bandwidth of IETF MAM : 300000 kbits/sec
Downstream LSP Count : 0