R3303-HP HSR6800 Routers MPLS Command Reference

166
Examples
# Set the maximum number of tunnel setup retries to 20.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te retry 20
Related commands
mpls te timer retry
mpls te route-pinning
Use mpls te route-pinning to enable route pinning.
Use undo mpls te route-pinning to restore the default.
Syntax
mpls te route-pinning
undo mpls te route-pinning
Default
Route pinning is disabled.
Views
Tunnel interface view
Default command level
2: System level
Usage guidelines
The mpls te route-pinning command cannot be used together with the mpls te reoptimization command
and the mpls te auto-bandwidth adjustment command.
Examples
# Enable route pinning.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te route-pinning
mpls te signal-protocol
Use mpls te signal-protocol to configure the signaling protocol for MPLS TE tunnel establishment.
Syntax
mpls te signal-protocol { crldp | rsvp-te | static }
Default
The signaling protocol for MPLS TE tunnel establishment is RSVP-TE.
Views
Tunnel interface view