R3303-HP HSR6800 Routers MPLS Command Reference

8
Views
Any view
Default command level
1: Monitor level
Parameters
label-value1: Specifies a label, or, when used with the label-value2 argument, the start label of a range
of labels. For the value range for the label-value1 argument, see the matrix table in the Usage guidelines.
to label-value2: Specifies the end label of a range of labels. For the value range for the label-value2
argument, see the matrix table in Usage guidelines.
The value range for the label-value1 and label-value2 argument is 16 to 97279.
all: Specifies all labels.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about labels 900 to 1500.
<Sysname> display mpls label 900 to 1500
Label alloc state: '.' means not used, '$' means used
------------------------------Static Label--------------------------------
900:........ ........ ........ ........ ........ ........ ........ ........
964:........ ........ ........ ........ ........ ........ ........ ....
------------------------------Dynamic Label-------------------------------
1024:...$.... ........ ........ ........ ........ ........ ........ ........
1088:........ ........ ........ ........ ........ ........ ........ ........
1152:........ ........ ........ ........ ........ ........ ........ ........
1216:........ ........ ........ ........ ........ ........ ........ ........
1280:........ ........ ........ ........ ........ ........ ........ ........
1344:........ ........ ........ ........ ........ ........ ........ ........
1408:........ ........ ........ ........ ........ ........ ........ ........
1472:........ ........ ........ .....
display mpls ldp
Use display mpls ldp to display information about LDP.
Syntax
display mpls ldp [ all [ verbose ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view