R3303-HP HSR6800 Routers MPLS Command Reference

10
Field Descri
p
tion
Nonstop Routing
State of LDP NSR:
• On—LDP NSR is enabled but the data backup is not
finished yet.
• Off—LDP NSR is disabled.
• Ready—LDP NSR is enabled and data backup is finished.
Instance ID Sequence number of the LDP instance.
VPN-Instance
Instance name of the LDP-enabled VPN. For the default VPN,
this field is blank.
Hop Count Limit Maximum hop count for loop detection.
Path Vector Limit Maximum path vector length.
Loop Detection Indicates whether loop detection is enabled.
DU Re-advertise Timer Label re-advertisement interval for DU mode.
DU Re-advertise Flag
Indicates whether label re-advertisement is enabled for DU
mode.
DU Explicit Request
Indicates whether explicit request transmission is enabled for
DU mode.
Request Retry Flag Indicates whether request retransmission is enabled.
Label Distribution Mode
Label distribution control mode of the instance: Ordered or
Independent.
Label Retention Mode
Label retention mode used by the instance. The device only
supports the Liberal mode.
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
display mpls ldp cr-lsp
Use display mpls ldp cr-lsp to display information about CR-LSPs established by CR-LDP.
Syntax
display mpls ldp cr-lsp [ lspid lsr-id lsp-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
lspid lsr-id lsp-id: Displays information about the specified CR-LSP. The lsr-id argument is the LSR ID of the
ingress, in the form of IP address. The lsp-id argument is the local LSP ID of the ingress, in the range of
0 to 65535.