R3303-HP HSR6800 Routers MPLS Command Reference

190
Table 67 Command output
Field Descri
p
tion
Origin codes
Route origin codes:
• i – IGP—The network layer reachability information is from
within the AS.
• e – EGP—The network layer reachability information is
learned through EGP.
• ? – incomplete—The network layer reachability information is
learned through other ways.
bgp.l2vpn Number of remote CEs in the BGP L2VPN.
CE ID CE number in the VPN.
nexthop IP address of the next hop.
pref Preference.
as-path AS-PATH of the route.
# Display L2VPN information with the RD being 100:1 and the CE ID being 4 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
CE ID Label Offset Label Base nexthop pref as-path
1 0 8202 3.3.3.9 100
Table 68 Command output
Field Descri
p
tion
Origin codes
Route origin codes:
• i – IGP—The network layer reachability information
is from within the AS.
• e – EGP—The network layer reachability
information is learned through EGP.
• ? – incomplete—The network layer reachability
information is learned through other ways.
CE ID CE number in the VPN.
nexthop IP address of the next hop.
pref Preference.
as-path AS-PATH of the route.
# Display L2VPN information with the RD being 100:1, the CE ID being 4, and the label offset being 0
in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4 label-offset 0
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
nexthop:3.3.3.9, pref :100, as-path :
label base:132096,label range:10,layer-2 mtu:0,encap type:Unknown or Reserved
label state
132096 down