R3303-HP HSR6800 Routers MPLS Command Reference

197
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0x220020
Table 73 Command output
Field Descri
p
tion
VC ID Remote VC ID.
VC State Status of the VC.
Destination Destination IP address.
CEM Class CEM class referenced by the interface.
Jitter Buffer Size In milliseconds.
Payload Size Size of the payload of a packet, in bytes.
Idle Code Padding string to be used in case of packet loss.
Client Intf Interface connected to the CE.
Local Group ID Local VC group ID.
Remote Group ID Remote VC group ID.
Tunnel Policy
Name of the tunneling policy used by the VC. If no tunneling policy is
specified for the VC, this field displays a hyphen (-).
Tunnel Type Type of the tunnel.
Tunnel ID ID of the tunnel.
Backup VC Information about the backup VC link.
# Display information about Martini VCs received from the remote peer.
<Sysname> display mpls l2vc remote-info
total remote ldp vc : 1
Transport Group Peer Remote Remote C Remote
VC ID ID Addr Encap VC Label Bit MTU
100 0 3.3.3.9 ppp 1025 0 1500
Table 74 Command output
Field Descri
p
tion
total remote ldp vc Total number of remote LDP VCs.
Transport VC ID Remote VC ID.
Group ID
Remote VC group ID, used for the L2VPN VC FEC TLV field of LDP
messages.
Peer Addr IP address of the peer.
Remote Encap VC type of the remote end.
C Bit
Indicates whether the control word function is enabled or not. 0
means disabled and 1 means enabled.
Remote MTU MTU of the remote interface.