R3303-HP HSR6800 Routers MPLS Command Reference

202
For more information about the output fields of the command, see Table 80.
# Display information about Kompella VCs on interface Serial 2/1/0.
<Sysname> display mpls l2vpn connection interface Serial 2/1/0
***Conn-type : remote
Local vc state : up
Remote vc state : up
Local ce-id : 1
Local ce name : ce1
Remote ce-id : 4
Intf(state,encap) : Serial2/1/0 (up,ppp)
Peer id : 3.3.3.9
Route-distinguisher : 100:1
Local vc label : 132100
Remote vc label : 132097
Tunnel policy : policy1
C bit is set
Tunnel Type : lsp
Tunnel ID : 0x226013
Table 81 Command output
Field Descri
p
tion
Conn-type Type of the connection.
Local vc state Local VC status.
Remote vc state Remote VC status.
Local ce-id ID of the local CE.
Local ce name Name of the local CE.
Remote ce-id ID of the remote CE.
Intf(state,encap)
Interface name (interface status, interface
encapsulation type).
Peer id IP address of the peer.
Local vc label Local VC label.
Remote vc label Remote VC label.
Tunnel policy Name of the tunneling policy.
C bit is set
Control word is enabled. If this function is not
enabled, this field will not be displayed.
Tunnel Type Type of the tunnel.
Tunnel ID ID of the tunnel.
# Display summary information about all Kompella VCs.
<Sysname> display mpls l2vpn connection summary
1 total connections,
connections: 1 up, 0 down , 0 local, 1 remote, 0 unknown
No. vpn-name local-num remote-num unknown-num up-num total-num
1 vpn1 0 1 0 1 1