R3303-HP HSR6800 Routers MPLS Command Reference

203
Table 82 Command output
Field Descri
p
tion
connections
Connection statistics, including the number of connections in up state, the
number of connections in down state, the number of local connections,
the number of remote connections, and the number of unknown
connections.
No. Sequence number.
vpn-name Name of the MPLS L2VPN.
local-num Number of local connections.
remote-num Number of remote connections.
unknown-num Number of unknown connections.
up-num Number of connections that are up.
total-num Total number of connections.
display mpls l2vpn fib ac vpws
Use display mpls l2vpn fib ac vpws to display Attachment Circuit (AC) information for the MPLS L2VPN.
Syntax
In standalone mode:
display mpls l2vpn fib ac vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display mpls l2vpn fib ac vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ chassis chassis-number slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connected to a CE by the interface type
and number.
service-instance service-instanceid: Specifies a service instance by its ID in the range of 1 to 4094.
slot slot-number: Displays the AC information for a card. The slot-number argument specifies the number
of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays the AC information for a card on an IRF member device.
The chassis-number argument refers to the ID of the IRF member device. The slot-number argument refers
to the number of the slot where the card resides. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.