R3303-HP HSR6800 Routers MPLS Command Reference

205
Field Descri
p
tion
InBytes
Number of bytes received on the AC.
This field is displayed only when inbound traffic statistics is
enabled for the service instance.
OutBytes
Number of bytes sent by the AC.
This field is displayed only when outbound traffic statistics is
enabled for the service instance.
display mpls l2vpn fib pw vpws
Use display mpls l2vpn fib pw vpws to display pseudowire (PW) entry information for the MPLS L2VPN.
Syntax
In standalone mode:
display mpls l2vpn fib pw vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display mpls l2vpn fib pw vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ chassis chassis-number slot slot-number ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting a CE by the interface type
and number.
service-instance service-instanceid: Specifies a service instance by its ID in the range of 1 to 4094.
verbose: Displays the detailed information.
slot slot-number: Displays the PW entry information for a card. The slot-number argument specifies the
number of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays the PW entry information for a card on an IRF member
device. The chassis-number argument refers to the ID of the IRF member device. The slot-number
argument refers to the number of the slot where the card resides. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.