R3303-HP HSR6800 Routers MPLS Command Reference

208
Field Descri
p
tion
Tunnel ID
Public tunnel ID and entry state of data packets. The entry
state can be Done or Waiting.
GRCount: Number of times that GR occurs.
SIG In VC Label Incoming VC label of the signaling packets.
SIG Out VC Label Outgoing VC label of the signaling packets.
Packets received Number of signaling packets received by the PW.
Receives discarded Number of incoming signaling packets dropped by the PW.
Packets sent Number of signaling packets sent by the PW.
Sends discarded Number of outgoing signaling packets dropped by the PW.
Tunnel ID
Public tunnel ID and entry state of signaling packets. The
entry state can be Done or Waiting.
GRCount: Number of times that GR occurs.
Backup PW Information about the backup PW.
display mpls static-l2vc
Use display mpls static-l2vc to display information about static virtual circuits (SVCs) created on the
device.
Syntax
display mpls static-l2vc [ interface interface-type interface-number [ service-instance instance-id ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays information about static VCs on the specified
interface. The interface-type interface-number argument specifies a PE-CE interface by its type and
number. If you do not specify an interface, the command displays information about static VCs on all
interfaces.
service-instance instance-id: Displays information about static VCs created for the specified service
instance. The instance-id argument specifies a service instance ID in the range of 1 to 4094. If you do not
specify a service instance, the command displays information about static VCs created for all service
instances.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.