R3303-HP HSR6800 Routers MPLS Command Reference

209
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify an interface or a service instance, this command displays the brief SVC information.
Otherwise, it displays the detailed SVC information.
Examples
# Display brief information about all static VCs created on the device.
<Sysname> display mpls static-l2vc
total connections: 1, 0 up, 1 down, 0 blocked
ce-intf state VCID SRVID tr-label rcv-label
Vlan23 up -- -- 23 24
Table 86 Command output
Field Descri
p
tion
total connections
Connections statistics, including the total number of static VCs, and the
number of static VCs in up, down, and blocked state.
ce-intfe Interface connected to the CE.
state VC state: up, down, or blocked.
VCID ID of the VC.
SRVID ID of the service instance of the VC.
tr-label Outgoing label—Label used when sending VPN packets.
rcv-label Incoming label—Label used when receiving VPN packets.
# Display detailed information about the static VCs created on interface Serial 2/1/0:0.
<Sysname> display mpls static-l2vc interface serial 2/1/0:0
***CE-interface : S2/1/0:0 is up
Service instance ID : --
CEM Class : satopexam
Jitter Buffer Size : 100 ms
Payload Size : 24 bytes
Idle Code : 0x99
VC State : up/up
Destination : 3.3.3.9
VC ID : 100/101
Transmit-vpn-label : 100/200
Receive-vpn-label : 300/400
Tunnel Policy : policy1
Tunnel Type : lsp
Tunnel ID : 0x226013
Backup VC
VC State : up/up
Destination : 3.3.4.9
VC ID : 200/201
Transmit-vpn-label : 500/600
Receive-vpn-label : 700/800
Tunnel Policy : policy1