R3303-HP HSR6800 Routers MPLS Command Reference

210
Tunnel Type : lsp
Tunnel ID : 0x226013
Table 87 Command output
Field Descri
p
tion
CE-interface Interface connected to the CE.
CEM Class CEM class referenced by the interface.
Jitter Buffer Size Jitter buffer size, in milliseconds.
Payload Size Size of the payload of a packet, in bytes.
Idle Code Padding string to be used in case of packet loss.
VC State Data VC and signaling VC state: up, down, or blocked.
Destination Destination IP address of the VC.
VC ID VC IDs of the data VC and signaling VC.
Transmit-vpn-label
Outgoing label—Label used by the data VC and signaling VC to
send VPN packets.
Receive-vpn-label
Incoming label—Label used by the data VC and signaling VC to
receive VPN packets.
Tunnel Type Type of the tunnel: LSP, CR-LSP, or GRE.
display pw-class
Use display pw-class to display the PW class information.
Syntax
display pw-class [ class-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
class-name: Specifies the name of a PW class, a case-insensitive string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no PW class is specified, the command displays information about all PW classes.