R3303-HP HSR6800 Routers MPLS Command Reference

238
Field Descri
p
tion
Peer Preferred Value Peer preference value.
BFD Whether BFD is enabled for the peer.
Routing policy configured Routing policy configured for the peer.
# Display the VPLS information for RD 100:1 in the BGP routing table.
<Sysname> display bgp vpls route-distinguisher 100:1
BGP Local Router ID : 2.2.2.9, Local AS Number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
BGP.VPLS: 1 destination
SITE ID LB Offset LB Size LB Base Nexthop LocPref
8 0 10 524624 3.3.3.9 100
Table 92 Command output
Field Descri
p
tion
BGP Local Router ID Router ID of the local BGP router.
Local AS Number Number of the local AS.
Origin codes
Route origin codes. Valid values include:
• i - IGP—The route is learned from within the AS.
• e - EGP—The route is learned through EGP.
• ? - incomplete—The route is learned in any other way.
BGP.VPLS Number of BGP VPLS.
SITE ID ID of a site in the VPLS instance.
LB Offset Label offset value.
LB Size Size of the label block.
LB Base Initial label of the label block.
Nexthop Address of the next hop.
LocPref Local preference.
# Display the VPLS information for specified RD, CE number, and label offset in the BGP routing table.
<Sysname> display bgp vpls route-distinguisher 100:1 site-id 4 label-offset 0
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
*Nexthop : 3.3.3.9 , Locpref : 100
Metric : 133 , Flag : 0x85
LB Base : 132096 , LB NewBase : 0
LB Size : 10 , Label Offset : 0
MTU :0 , Encap Type :Unknown or Reserved
Path Attribute : RefCount : 1, MED 133: , AS Path : 200
The following table gives the description on the fields of the display bgp vpls route-distinguisher site-id
label-offset command.