R3303-HP HSR6800 Routers MPLS Command Reference

246
<Sysname> display pw-class
Total 3 PW-class(es)
PW-class name Transport mode Tunnel policy
1234 Ethernet abc
1025 VLAN abc
1026 VLAN -
Table 99 Command output
Field Descri
p
tion
Transport mode PW transport mode.
Tunnel policy
Name of the tunneling policy used by the PW class. If no tunneling policy is specified
for the PW class, this field displays a hyphen (-).
display vpls connection
Use display vpls connection to display information about VPLS connections.
Syntax
display vpls connection [ bgp | ldp | static | vsi vsi-name ] [ block | down | up ] [ verbose ] [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bgp: Specifies all Kompella VPLS connections.
ldp: Specifies all Martini VPLS connections.
static: Specifies all static VPLS connections.
vsi vsi-name: Specifies a VPLS instance by its name, a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
block: Specifies VPLS connections that are blocked. A PW in the block state is not used for the moment.
down: Specifies VPLS connections that are down.
up: Specifies VPLS connections that are up.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.