R3303-HP HSR6800 Routers MPLS Command Reference

268
<Sysname> system-view
[Sysname] vsi aaa
[Sysname-vsi-aaa] unknown-unicast-restrain 50
vpls-family
Use vpls-family to enter BGP-VPLS address family view.
Syntax
vpls-family
Views
BGP view
Default command level
2: System level
Examples
# Enter BGP-VPLS address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] vpls-family
[Sysname-bgp-af-vpls]
vpn-target (VSI BGP view)
Use vpn-target to configure one or more VPN targets for a VPLS instance.
Use undo vpn-target to remove the specified or all VPN targets of a VPLS instance.
Syntax
vpn-target vpn-target &<1-16> [ both | export-extcommunity | import-extcommunity ]
undo vpn-target { all | vpn-target &<1-16> } [ both | export-extcommunity | import-extcommunity ]
Default
No VPN targets are configured and you must configure VPN targets when creating a VPLS instance.
Views
VSI BGP view
Default command level
2: System level
Parameters
vpn-target&<1-16>: Adds VPN target extended community attributes to the import VPN target extended
community attribute list (Import Target) or export VPN target extended community attribute list (Export
Target). &<1-16> means that you can add up to 16 VPN targets..
A VPN target attribute can be a string of 3 to 21 characters in one the following formats:
• 16-bit AS number:32-bit user-defined number, such as 101:3.
• 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1.