R3303-HP HSR6800 Routers MPLS Command Reference

279
Default command level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance vpn-instance-name: Displays information about the specified VPN. The vpn-instance-name
argument specifies the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
group-name: Specifies the name of the peer group, a case-sensitive string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the BGP VPNv4 peer group a for the VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group a
BGP peer-group is a
remote AS number not specified
Type : external
Maximum allowed prefix number: 150000
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
ORF advertise capability based on Prefix(type 64):
Local : both
Peer Preferred Value: 99
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 200 18 21 0 1 00:12:58 Established
Table 106 Command output
Field Descri
p
tion
BGP peer-group Name of the BGP peer group.
remote AS number Number of the remote AS.
Type Type of the BGP peer group.
Maximum allowed prefix number
Maximum number of routes that can be learned from the
peers in the peer group.