R3303-HP HSR6800 Routers MPLS Command Reference

19
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
display mpls ldp remote-peer
Use display mpls ldp remote-peer to display information about remote LDP peers.
Syntax
display mpls ldp remote-peer [ remote-name remote-peer-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
remote-name remote-peer-name: Displays information about a remote peer. remote-peer-name indicates
the name of the remote peer, a case-insensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about remote peer BJI.
<Sysname> display mpls ldp remote-peer remote-name BJI
LDP Remote Entity Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec
Hello Message Sent/Rcvd : 3/2 (Message Count)
--------------------------------------------------------------------------