R3303-HP HSR6800 Routers MPLS Command Reference

307
# Display tunneling policy aaa.
<Sysname> display tunnel-policy policy-name aaa
Tunnel policy name : aaa
Preferred paths : not configured
Select-Seq : CR-LSP
Load balance number : 1
Table 125 Command output
Field Descri
p
tion
Tunnel policy name Name of the tunneling policy.
Preferred paths Preferred tunnels.
Number Path number.
Interface Tunnel interface.
Tunnel type Tunnel type, GRE or TE.
Fallback
Whether fallback is enabled (fallback enables selecting another tunnel
when the preferred tunnel is unavailable):
• enabled.
• disabled.
Select-Seq Preference order for tunnel selection.
Load balance number Number of tunnels for load balancing.
Related commands
• tunnel-policy
• tunnel select-seq
display vpn label operation
Use display vpn label operation to display the VPN label processing mode on an egress PE.
Syntax
display vpn label operation [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.