R3303-HP HSR6800 Routers MPLS Command Reference

335
Default command level
2: System level
Usage guidelines
The command applies to an inter-AS option B VPN.
Examples
# In BGP-VPNv4 subaddress family view, disable route target filtering for received VPNv4 routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] undo policy vpn-target
# In BGP-L2VPN address family view, disable route target filtering for received VPNv4 routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] undo policy vpn-target
# In BGP-VPLS address family view, disable route target filtering for received VPNv4 routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] vpls-family
[Sysname-bgp-af-vpls] undo policy vpn-target
preferred-path
Use preferred-path interface tunnel to configure a preferred tunnel and specify a tunnel interface for it.
Use undo preferred-path to remove a preferred tunnel.
Syntax
preferred-path number interface tunnel tunnel-number [ disable-fallback ]
undo preferred-path number
Default
No preferred tunnel exists.
Views
Tunneling policy view
Default command level
2: System view
Parameters
number: Specifies the number of the preferred tunnel, in the range of 0 to 63. A smaller number means
a higher priority.
interface tunnel tunnel-number: Specifies a tunnel interface for the preferred tunnel. The tunnel-number
argument represents the tunnel interface number.